Products > Test Analysers to International Test Methods > Reference & Check Fuel Blending For Octane & Cetane Measurement Model NABLEND 88XX

Related Reading

[ Brochure ]

NABLEND series of automatic blending units have been designed to automate the blending procedure of reference and check fuels for octane and cetane number measurement. The instrument can be used for other hydrocarbon blending purposes where the accuracy and the speed of the procedure are critical.

MAIN CHARACTERISTICS

Ease for use and accuracy

Using the built-in touch screen the operator will only type the target octane/cetane number and the sample volume and the blending unit will automatically prepare and certify the reference fuel with an accuracy of 0.01 ON or CN.

Quick blending

From 2 to 4 minutes depending on the samples sizes.

Results traceability

The results are also stored in an internal database and certificates can be printed out for all blends.

90-264 V, 0.8A, 47-440 Hz (610x820x1850mm) ±270kg /
115V on request

SOFTWARE CHARACTERISTICS

Compatible LIMS

XML based internet user interface:

An unlimitted number of units can be remotely accessed and controlled from any authorized PC from the network.

BLENDING CONTROL

The strokes of the dosing pumps will be decreased below 10mg/stroke at the end of a dosing cycle, in order to reach nearly perfect accuracy at the highest speed.

Access to maintenance and calibration of tanks and pumps.

Complete database.

The database will not only store the blending parameters, but the whole history of logins, operation, remote database access, remote service access and internal technological events.

Reference and check fuel blending.

Built-in touch screen computer and printer.

Complete and automatic documentation of
prepared reference fuels.

Excellent accuracy and speed.

Full remote management and service over the internet or direct phone or GSM/GPRS connection.

Clean and comfortable use.

Final PRF is mixed in solvent proof dedicated bottles of maximum capacity 1litre.

Catalogue No. NL 52000
Model NABLEND 8875, automatic stand alone unit with 2 fluidchannels, for blending cetane reference fuels according ASTM D613 composed of two blending components: nCetane, AMN or HMN, or U and T components.

Catalogue No. NL 52100
Model NABLEND 8873, automatic stand alone unit with 3 fluid channels, for blending octane reference and check fuels according ASTM D2699 and D2700 composed of two blending components: iso-octane, normal heptane and toluene.

Catalogue No. NL 52200
Model NABLEND 8877, automatic stand alone unit with 5 fluid channels, for blending octane and cetane reference and check fuels according ASTM D613, ASTM D2699 and ASTM D2700 composed of three blending components: iso-octane, normal heptane and toluene for octane and two blending components: nCetane, AMN or HMN, or U and T components for cetane.

Catalogue No. NL 52300
Model NABLEND 8879, automatic stand alone unit with 6 fluid channels, for blending octane and cetane reference and check fuels according ASTM D613, ASTM D2699 and ASTM D2700 composed of four blending components: iso-octane, normal heptane, 80/20 blend and toluene for octane and two blending components: nCetane, AMN or HMN, or U and T components for cetane.

Catalogue No. NL 52400
Model NABLEND 8878, – 8 fluid channels.

Catalogue No. NL 52500
Model NABLEND 8810, – 10 fluid channels.

OPTIONAL ACCESSORY
Catalogue No. NL 53001 Explosion-proof drum pump.

MAIN CONSUMABLE
Catalogue No. NL 52001 Bottle, solvent resistant with cock (1L)

SPARE PARTS
Catalogue No. NL 52002 Dosing pump
Catalogue No. NL 52003 Printer paper (roll)
Catalogue No. NL 52004 Fuel filter
Catalogue No. NL 52005 Solenoid valve
Catalogue No. NL 52006 Injection head O-ring

Catalogue No. NL 5200